Trade Counter

A large range of hydraulic components are available from our trade counter. Call with all your requirements 01482 620040

 

Tube and Fittings

A full range of hydraulic fittings and tube are available from stock manufactured in Carbon and Stainless Steel.

Hydraulic Tube is stocked in 6m length Metric outside diameter sizes:- 6mm, 8mm, 10mm, 12mm, 14mm 15mm, 16mm, 18mm, 20mm, 22mm, 25mm, 28mm, 30mm, 35mm, 38mm, 42mm O/D.

Tube is available in material. A4 : 1.4404 : 316L Stainless Steel and Carbon Steel E235 : ST37-4

Standard and Heavy Series Tube Clamps (DIN 3015) Components are available in Carbon and Stainless Steel.

Tube Fittings 24 Degrees to DIN 2353 –  EN ISO 8434-1 Available with Compression Cutting Rings
Available is Plated Steel and Stainless Steel.

Full Range of sizes 6L, 8L, 10L, 12L, 15L, 18L, 22L, 28L, 35L, 42L
6S, 8S, 10S, 12S, 14S, 16S, 20S, 25S, 30S, 38S

Male and Female Stud Couplings.

Elbows, Tee Pieces, Straight Couplings, Reducing Couplings, Banjo Elbows.

JIC Fittings can be supplied as adaptors or complete with Nuts and sleeves for use with flared Hydraulic Tube. A fill range if fittings are Available in thread sizes 7/16”, ½”, 9/16, ¾”, 7/8”, 1.1/16”, 1.5/16”, 1.5/8”, 1.7/8”

BSP Threaded Adaptors Manufactured from Electro Plated Steel and Stainless Steel DIN 3852
1/8”, ¼”, 3/8”, ½”, 5/8”, ¾”, 1”, 1.1/4”, 1.1/2”, 2”, 2.1/2”, 3” BSP

Other Ranges include Metric adaptors, ORFS Fittings SAE O Ring Fittings. Taper Fittings with BSP and NPT Threads
Fittings Include Male/Male Straight Fittings, Male/Female Reducers, Bulkhead Fittings, Elbows, Tee Pieces, Adjustable Swivel and Lock Nut Fittings. Blanking Caps and Blanking Plugs.

SAE J518 C Flanges and Socket Weld Fittings. (DIN ISO 6162-1/2)

½” up to 4” in both SAE 3000 Series Code 61 and SAE 6000 Code 62

Fittings can be sealed with Dowty washers or supplied with Captive WD style seals.

Quick Release Couplings are stocked in BSP Sizes from ¼” to 1” in the following Form.
ISO A, ISO B, Flat Face, Teamer Couplings, High Pressure Quick Release Couplings

 

Hose and Fittings

We Stock a wide range of Hydraulic and Industrial hose and fittings. Hoses are assembled on site and can be pressure tested when required.
A large stock of Stainless Steel and carbon steel fittings are available in all popular hydraulic standards. Hose assemblies can be made whilst you wait and are competitively priced from quality components to the latest standards.

 

Standard hose ranges

  • I Wire Hose in sizes ¼” to 2” Bore to DIN-EN 853 1SN
  • 2 Wire Hose in sizes ¼” to 2” Bore to DIN-EN 853 2SN
  • 2 Wire Hose in sizes ¼” to 2” Bore to DIN-EN 857 2SC
  • 4 Wire Hose in Sizes ¼” to 2” Bore to EN
  • 6 Wire Hose in Sizes 1” to 2” Bore to EN
  • R5 thermoplastic Hydraulic Hose
  • R7 High temp hose
  • R8 High pressure thermoplastic Hose
  • Suction Hose
  • Fuel Hose
  • Air line hose
  • PTFE Smooth bore Hose
  • PTFE Convoluted Hose

All hose can be supplied individually cut to length or as a assembly with swaged ends.

Swaged hose ends are stocked with a wide range of Male and female threads.

BSPP, BSPT, NPT, NPS, JIC, ORFS, DIN 2353, SAE Code 61 & 62 Flanged fittings.

 

Hydraulic Components

We stock a range of hydraulic components which include.

 

Ball Valves

High Pressure Ball valves, Low Pressure nickel plated brass ball valves, High and Low Pressure 3 Ported Ball valves. Sizes from ¼” to 2” BSP are available.

 

Hydraulic Restrictor valves

Needle Valves are stocked in sizes ¼” BSP to 1” BSP

Flow restrictor valves with reverse flow check valve are available fro ¼” BSP to 1” BSP

 

Pressure Gauges

Pressure gauges are stocked with 63mm face, From 2.5 Bar up to 600 Bar with ¼” BSP Threaded Connection, with rear and bottom pipe connection and various mounting configurations.

 

Pressure Transducers and Pressure Switches

Wika, Fox, Barksdale and Hydrotecknik available from stock.

 

Hydraulic Filters

A range of hydraulic filters and filter elements are available from leading Manufactures including Hydac, MP Filtri, Parker. Our range includes Pressure Filters, Return Line Filters which can be supplied for mounting in Line, tank Immersed and tank Top. Suction Strainers are also available from stock.

 

Hydraulic Reservoir Components

All the components for hydraulic tanks can be supplied from stock including.
Level Sight Glasses, Bulls eye sight Glass, Filler Breathers, Tank Breathers, Suction strainers, Filters. Dip Sticks, Access covers, Pressure gauges, Bell housings and Drive Couplings.

 

Hydraulic valves

  • Non-Return Valves
  • Solenoid operated directional control valves for CETOP mounting.
  • Manual and electrically operated directional control valves.
  • Relief valves.
  • Shuttle valves.
  • Pressure reducing Valves.
  • Sequence Valves.
  • Pilot operated check valves.
  • Overcentre Valves

 

Hydraulic Pumps

A full range of hydraulic pumps can be supplied please contact us to discuss all your requirements.

 

Pumps-

Gear pumps:- External and Internal gear pumps manufactured from Aluminium and Cast Iron.

Vane Pumps:- Fixed and Variable displacement.

Piston pumps:- Fixed Displacement, and Variable displacement for Open and Closed loop systems, Open loop pumps can be supplied with pressure Compensated, Load sensing and power Control.

 

Hydraulic Motors

Contact us to discuss any Hydraulic motor requirements we can supply all types of hydraulic motors to suit your application.

 

Gear Motors – Orbital Motors – Vane Motors – Piston Motors

 

Please contact us today on 01482 210860 to discuss your requirements